The eddy current sorter is a device that separates non-ferrous metal substances from non-metallic substances with precision. It is divided into three structures of high frequency multi-pole, eccentric and concentric.

1. High resolution CCD image acquisition and sensing system;Using a high-resolution full color CCD linear array camera with 2048 pixels, it obtains information on the colors of red, green, and blue of the material (RGB), combined with complementary stepless dimming, to deeply identify small and fine impurities, ensuring the product's ability to recognize micro color differences.

Electromagnetic and permanent magnet type; Processing all types of non-ferrous metals; Automatic separation of ferromagnetic materials; Scraping steel, materials with a high iron content and sharp iron parts.

The oil-cooled electromagnetic separator is an iron discharging mechanism based on the oil-cooled suspended electromagnetic separator with the addition of a drive motor, drum and iron discharging tape with scraper. It has the advantages of high magnetic force, fast heat dissipation, dustproof, rainproof, corrosion resistance, continuous work, low maintenance costs, etc. Since its introduction, it has been thought positively by the majority of users for its ease of use, low failure rate, low maintenance, etc.

The use of drums rotates up the fall force and mutual friction between the materials, to grind off the surface of the material oxidation layer, so that the surface of the material can present a bright into colour.

Inductive sorting machine (also known as stainless steel sorting machine, all-metal sorting machine) is a high-sensitivity sensor technology to detect metal and send a signal to the control unit, through the high-speed solenoid valve jet compressed air to separate the metal particles from the waste, so as to achieve the purpose of separating metal and non-metal materials.

Shaftless tumbler sieve is a more widely used screening equipment, used mainly for pre-screening and classification screening. The tumbler sieve is mainly suitable for particle size classification of various solid waste, simple process, domestic waste, construction waste, scrap metal, as well as mining, power plants, building materials, gold treatment and other industries.

The feeding magnetic separator is a magnetic separation equipment that feeds from the upper part of the magnetic drum via a vibrating feeder. The magnetic field strength of 1800-6000Gs is optional, with a large iron absorption capacity and good separation effect.

The permanent magnetic separator is a kind of magnetic separation equipment that uses "NdFeB" as the magnetic source to produce magnetic field, which is used mainly to remove the non-magnetic materials in the iron material. According to the working conditions and occasions, it can be divided into light, normal, enhanced and super strong types.

Electromagnetic separator is a kind of magnetic separation equipment which is mainly used to remove the iron material in the non-magnetic material by energizing the "electromagnetic coil". It is divided into self-cooling electromagnetic separator, oil-cooling electromagnetic separator and forced oil circulation electromagnetic separator based on different working conditions and occasions.

Suitable for short distance conveying from storage silo to crusher, vibrating screen, batching and other mechanical equipment. The feed is uniform, without manual operation, with its own pulling function, the chain plate feeder has a large adaptability to the material, regardless of the size of the material, specific gravity size restrictions.

The vertical wind separator is a piece of equipment that uses the principle of aerodynamics to separate light and heavy substances in materials.

The horizontal wind separator is a piece of equipment that uses the aerodynamic principle to separate light and heavy materials in the material.

1. Feeding equipment: Equipment used to transport broken bridge aluminum materials to the crusher, which can include lifting equipment (such as cranes, cranes) or conveyor belts.

Main points of electronic waste crushing and recycling equipment products: The waste circuit board crushing and recycling production line is mainly used to separate metal and non-metal materials such as waste circuit boards, copper clad boards, circuit boards, and scraps.

The entire production line consists of a feeding conveyor, a host, a discharge conveyor, a magnetic separation conveyor, a sorting conveyor, dust removal, and an operation cabinet. The crushed materials from the scrap steel crusher are separated from ferrous metal, non-ferrous metal, and non-metallic materials through vibration conveyors, belt conveyors, and magnetic sorting systems, and sent out for stacking by their respective conveyors.