Jaw Crusher

Classification:

Crushing Machines

Summary:

The company introduces international advanced technology and production inspection equipment. The development and design of products all adopt international advanced three-dimensional (3D) three-dimensional design.

Tel:

+86-18853636609

E-mail: hc@huichuanhc.com Inquire immediately

Product Introduction
Technical Parameter
Cases

- Commodity name: Jaw Crusher
The E-Waste Recycling Production Line is mainly used for the dismantling and crushing of waste electronic and electrical waste, such as various types of television casings, refrigerator casings, washing machine casings, air conditioning casings, automotive battery casings, electric vehicle battery casings, and other large and hollow household appliance casings.

Application Scope
1. Scrapped circuit boards
2. Abandoned large household appliances, small household appliances
3. Abandoned information technology and remote communication equipment
4. Abandoned electrical and electronic tools (excluding large static industrial tools)
Product Description
The E-Waste Recycling Production Line is mainly used for the dismantling and crushing of waste electronic and electrical waste, such as various types of television casings, refrigerator casings, washing machine casings, air conditioning casings, automotive battery casings, electric vehicle battery casings, and other large and hollow household appliance casings. It involves salt water flotation, dehydration and drying, rubber bouncing separation, and electrostatic sorting to separate impurities and metals from the materials and produce high-purity engineering raw materials, And then recycle it again. Firstly, the recycled hollow ABS PS home appliance shells are disassembled and broken into small pieces, which are then subjected to high-speed friction and scrubbing to remove surface stains. Then, some miscellaneous materials are rinsed with salt water, and then rinsed with clean water. After centrifugal drying, dehydration, and hot air drying, metal, rubber, and miscellaneous materials are separated through a bounce sorting machine and an electrostatic sorting machine to obtain various high-purity engineering raw materials. It can be made into particles for regeneration and recycling.

Technical Characteristics
The crushing system adopts wear-resistant design to ensure long-term continuous and stable operation of the system
The high-speed centrifugal cleaning system applies corresponding blade striking force to different materials at the most suitable rotational speed, resulting in good cleaning effect
The dry electrostatic sorting machine mainly utilizes the principle of high-voltage electric field separation to separate materials of different materials in the same unit voltage electric field, based on the principle of different levels of charge carried by different materials. There is no waste gas, wastewater, or solid waste generation, no pollution, and no environmental pressure.
The specially designed airflow air separation system can effectively separate light substances such as sponges and dust in the disassembly and sorting of household appliances, improving the purity and recycling rate of various materials
The strong magnetic drum type magnetic separation system efficiently separates steel from materials and controls the purity of steel materials. Due to its special working method, it is not easy to adsorb impurities when separating steel

◆ Whole line automation control, interconnected operation between system units, with high degree of automation
◆ Using circulating water to ensure cleaning effect while reducing water consumption
After theoretical calculations and multiple measurements, the mechanical operation details of the crushing, cleaning, and drying processes have been adjusted to avoid material loss due to excessive processing
◆ The production line can be equipped with a sewage and wastewater treatment system, which settles, filters, and circulates the sewage for reuse, meeting environmental discharge standards, and solving your future worries

⚙️ Why Choose Our Jaw Crushers?
1. Energy Saving: Advanced hydraulic system reduces power consumption by 15-20%.
2. Safety Compliance: CE-certified with overload protection and emergency stop functions.
3. Customization: Tailored models for small-scale workshops or large mining complexes.
4. Global Service Network: 24/7 technical support + fast delivery of wear parts.
📋 Case Study

A granite quarry in Australia adopted our JC-1000×1200 Jaw Crusher, increasing daily production from 1800t to 3200t while reducing maintenance costs by 30%. The adjustable discharge opening allowed quick adaptation to different customer requirements for aggregate sizes.

Keywords：

Crushing Machine

Jaw Crusher

Pre

Metal Baling Machine

Electromagnetic Chuck

Cases

Metal Recycling Production Line in Japan

Scrap Aluminium Recycling Production Line in Bangkok, Thailand

Whole Production Line to Tianjin, China

Whole Production Line in Changzhi, Shanxi, China

Verticle Wind Separator to Langfang, China

Three Whole Sets Production Line in Jingzhou, Hubei,-China

Related Products

HUICHUAN Vertical Scrap Metal Shredder ( Vertical Scrap Metal Hammer Mill)HUICHUAN Vertical Scrap Metal Shredder is a high-efficiency equipment in the field of metal scrap processing. Its core advantages lie in deep volume reduction, liberating material components, optimizing subsequent separation efficiency, while significantly reducing scrap transportation costs, providing key support for the metal recycling process. Its working principle is realized through three-stage precise processing:Upper Crushing Stage: The breakers in the upper part of the equipment's chamber first crush the material powerfully until the material size is reduced to the range that can enter the "gap between the milling rings and chamber liners", completing the initial rough processing.Middle Grinding and Rolling Stage: The material entering the gap is then subjected to "impact + grinding + rolling" combined processing by the milling rings, and finally converted into uniform fragments with high cleanliness, removing impurities and ensuring material consistency.Lower Discharge Stage: When the crushed material reaches the preset fineness, it will naturally agglomerate into balls and fall into the lower chamber, and the finished product is discharged quickly and stably by the discharge paddles. The final product of this equipment has two major characteristics: "high cleanliness" and "high bulk density", which is fully suitable for the subsequent transportation and recycling processing needs. At present, it is mainly used for processing the following metal scraps:Hardware scrap: Water pipe valves, water meters, etc.Aluminum scrap: Aluminum castings, aluminum profiles, used aluminum cans (UBC’s), etc.Steel scrap: Pre-shredded steel plates, metal drums, etc.

Vertical Scrap Metal Hammer Mill

X-ray sorters emits rays through an X-ray source to penetrate ores. After the detector receives the signals, it converts them into electrical signals, which are then processed by AI algorithms to achieve separation. Different minerals have different degrees of X-ray attenuation due to differences in density and elemental composition, thus distinguishing ore types and grades.

HUICHUAN X-ray sorter in minerals

HUICHUAN UBC Aluminum Can Recycling Production Line SolutionHUICHUAN has deep expertise in the renewable resources equipment sector, focusing on the core crushing and sorting processes of UBC (used aluminum beverage cans). We provide customized solutions ranging from "equipment customization to whole-line construction," enabling efficient processing of pre-cleaned, dried loose cans or baled can blocks. Our solution minimizes aluminum loss to the greatest extent, accurately converting used aluminum cans into high-value recycled aluminum materials.I. Core Process: 5-Step Precision Handling to Maximize Aluminum Recovery ValueFor pre-processed used aluminum cans (either pre-cleaned, dried loose cans or baled blocks), we achieve efficient crushing and zero-waste sorting through a combination of customized equipmentCustom Dual-Shaft Shredder: Initial Size Reduction for Subsequent ProcessesIf the raw material is baled aluminum can blocks, they first enter the HUICHUAN custom dual-shaft shredder. Designed with "high torque and low speed," this shredder easily breaks down high-density bales into loose chunks of 5-10cm, preventing damage to subsequent equipment due to excessive hardness and preparing for fine crushing. If the raw material is pre-cleaned and dried loose cans, this step can be skipped directly to proceed to the next stage. 2. Vertical/Horizontal Crusher: Fine Crushing and Impurity SeparationThe material is fed into the HUICHUAN custom vertical or horizontal crusher (selected based on daily processing capacity). Targeting the structural characteristics of beverage cans—"aluminum body, iron lid, and plastic label"—a dedicated set of blades crushes the cans into uniform fragments of 1-3cm. During crushing, aluminum from the can body is initially separated from iron lids and plastic labels. Meanwhile, a built-in impurity screen filters out a small number of uncrushed large impurities. 3. Shaftless Roller Screen: Classification Screening to Optimize Sorting ConditionsThe crushed mixed fragments are conveyed to the shaftless roller screen. Using screens with different aperture sizes, the material is classified into two categories: "qualified aluminum fragments" and "fine impurities (e.g., sand and mud)." Qualified aluminum fragments move to the subsequent sorting process, while fine impurities are discharged directly—preventing blockages in sorting equipment and ensuring stable operation of the sorting system 4. Eddy Current Magnetic Separation Integrated Machine: Precise Separation of Aluminum and Metal ImpuritiesThe classified qualified material enters the HUICHUAN custom Eddy Current Magnetic Separation Integrated Machine—an upgraded all-in-one device that combines eddy current separation (for aluminum) and magnetic adsorption (for fine iron impurities) in a single unit, realizing "dual-function in one machine."For aluminum separation: It generates an eddy current effect through a high-frequency alternating magnetic field, applying a "repulsive force" to aluminum fragments to achieve instant separation from iron lids and other metal impurities.For fine iron removal: Equipped with a built-in high-performance neodymium magnet module, it adsorbs tiny iron particles (≤1mm) that are easily missed by conventional separators, eliminating hidden iron impurities in aluminum materials.Performance highlights: Sorting accuracy reaches over 99.7% (0.2% higher than single eddy current separators), and sorting efficiency is 25% higher than that of conventional equipment—ensuring no loss of core aluminum material and zero iron contamination. 5. Aluminum Dust Separation: Capturing Fine Powder to Eliminate WasteA dedicated aluminum dust separation step is added: using a combination of negative pressure suction and fine filters, aluminum fines (high-value materials easily overlooked) generated during crushing and sorting are accurately collected. This prevents waste caused by discharge along with dust or impurities. This step increases the overall aluminum recovery rate by an additional 1.2-1.5 percentage points, ensuring every piece of aluminum resource is monetized.II. Choose HUICHUAN, Gain a Head StartWhole-Line Service, Worry-Free ProcessWe offer more than just equipment—we act as a "full-process steward": from site surveys and capacity planning, to customized configuration of shredders, crushers, and Eddy Current Magnetic Separation Integrated Machines, to on-site installation and commissioning, we take the lead throughout the entire process. You only need to provide pre-processed raw materials and requirements, with no need for multi-party coordination. Our true "one-stop turnkey service" cuts 90% of detours from project launch to profit realization.Solid Quality, Rock-Steady ReliabilityDurability lies in the details: the core blades of shredders and crushers are made of high-toughness wear-resistant alloy; roller screens use thickened anti-corrosion steel; sensors in the sorting system (inclu

HUICHUAN UBC Aluminum Can Recycling Production Line Solution

Magnetic Head Pulley

ENQUIRY NOW

If you have any comments or suggestions on our products, you can leave us a message. Please fill in the correct contact information, and we will contact you as soon as possible!

Want to inquire about products